Sea gull lighting 88662-185 Guia de Instalação descarregar pdf

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

nd create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

•

You don’t need special tools to install this fixture.

•

Be sure to follow the steps in the order given.

• Read instructions carefully.

•

Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

FIGURE 1

*OUTLET BOX

UNIVERSAL

MOUNTING

BAR (A)

*NOT INCLUDED

BACK

PLATE (C)

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1506

12508

*WIRE

CONNECTORS

GLASS (E)

RET

AINING

RING (G)

NOTE: This glass is handcrafted, the slight imperfections in the

glass add to the authenticity of the fixture.

GREEN

GROUNDING

SCREW (H)

MOUNTING

SCREWS (B)

*OUTLET BOX

SCREWS

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

NOTE: FOR FIXTURES LABELED FOR WET LOCATION AND

USED OUTDOORS.

CAUTION:

To reduce the risk of electrical shock, provide a

watertight seal between the fixture and the mounting surface by

using a silicone or similar caulking.

WET LOCATION

NOTE FOR FIXTURES THAT ARE SOLID BRASS:

NOTE: TO KEEP YOUR SOLID POLISHED BRASS FIXTURE LOOKING

NEW FOR YEARS TO COME, REGULARLY APPLY A GOOD QUALITY

NON-ABRASIVE CAR WAX TO ALL METAL SURFACES, GIVING THE

FIXTURE AN EXTRA PROTECTIVE COATING.

1 2

Resumo do Conteúdo

Página 1

Carefully remove the fixture from the carton and check that all partsare included, as shown in figure 1. Be careful not to misplace any ofthe screws o

Página 2

After wires are connected, tuck them carefully inside the outlet box.Position backplate (C) over mounting screws (B) and secure in placeby threading c

Comentários a estes Manuais

Sem comentários

Sea gull lighting 88662-185 Guia de Instalação

Consulte online ou descarregue Guia de Instalação para não Sea gull lighting 88662-185. Sea Gull Lighting 88662-185 Installation Guide Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com não Sea gull lighting 88662-185